Every practitioner of the dark arts needs ritual candles. When I saw these bleeding candles online I thought they were so cool. But, I didn’t think they were $15 – $30 cool. Also, they only came in white and I thought they’d look much better in black. I knew this would be an easy project that would let me upcycle thrift store candles for much less.
- Black candles, as many as you want to make (optional use white or other colored candles if you prefer)
- Red candle, the darker red the better, the dripped wax will be lighter than the source candle, so keep that in mind when selecting your red candle (or get several red candles and experiment).
- A lighter
- Scissors or box cutter (optional)
- Waxed paper or newspaper
- Candle holders (optional – but you’ll eventually need them), or a box or something you can poke a hole in to hold the candles while you work.
I bought my candles at thrift stores, because I didn’t care if they were dinged up, I think it adds to the aged character I was aiming for. Also, they are super inexpensive and I was able to get a whole bunch of candles for less than $5.00.
Prepare your work surface. This is the the step I always forget because I’m excited to just dive right into the project. I highly recommend at least putting down some newspaper or other covering because the red dye in the candle wax can stain some surfaces.
If you are using candle holders that you don’t want to have wax dripped on, cover them with a paper towel, wax paper or newspaper before you put the candle in. You can also just cut a small cross into a box to insert the candle into while working. If you’re using a temporary holder but want to keep the puddled wax at the bottom when you transfer the candle to the final holder, line the temporary holder with waxed paper.
Trim your Candles. The next step is to determine how tall you want your candles. I wanted the candles to look like a practitioner of the dark arts has used them in many a ceremony. They were too tall and sprightly to have seen so much sorrow, so I cut them off shorter (also, I was too impatient to wait for them to burn down). You can trim them at the bottom if you like, but if you go that route, make sure you trim at at spot before the candle tapers, so it’s not loose in your holder.
With tapers, it is better to trim from the top, for a more authentic look and so they don’t wobble in the holder. Using old craft scissors, a box cutter, or the strength of your bare hands, cut into (or break) the wax using care not to cut all the way through the wick. After the wax crumbles away from the wick, pull it up to expose the wick and cut it approximately 1/4 to 1/2 an inch above the top the shortened candle (you can always trim it later). I didn’t worry about making the cuts even, or the same height, since I was going for an aged look.
Burn down the top. The idea is to make it look like the candles bled while burning. With this is in mind, whether you’re starting with a fresh pristine candle, or one you’ve trimmed, you will want to burn down the new top, or broken edges, before you start dripping the red wax on. Light the candle and let it burn until the top is melted enough to look used. Once you get it to where you want it, blow out the candle.
The fun part! This is the best part – just don’t forget in all of your excitement to use caution while handling the lit candles. Fire and hot wax burn people and things. We only want the illusion of bleeding; real bleeding and sacrifice are not required.
Light the red candle, holding it upright a few seconds to get a good melt started. Start dripping the red wax on the top of the black candle. How long you do this, and how much you build up, is a matter of personal preference. I think I might have overdone it just a little on a couple of mine because it was simply too much fun! Build it up until it looks right to you, dripping it down different areas. Drips will tend to gather on top of each other and build up, so play with it until you get the look you want.
Once you like how it looks, light the black candle and extinguish the red one. Let the black candle burn a minute or so to burn off any wax that dripped onto the wick and to develop the proper texture on top for a candle that’s seen many a ritual.
Put these candles in a candle holder and place them on your mantel, your buffet, your table, your alter, wherever you perform your sacrifices. I don’t light them, because they will not “bleed” as they burn, but I think they give an appropriately spooky feel to my Halloween Mansion. Happy Haunting!
These would also look great in a spooky Candlelier or Candelabra. Looking for other spooky DIYs? Check out our Spooky Chandelier and our Faux Spell Book.